vlmk33.. www.vishay.com vishay semiconductors rev. 1.9, 03-aug-15 1 document number: 81350 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power smd led plcc-2 description the vlmk33.. series is an advanced modification of the vishay vlmk31.. series. it is designed to incorporate larger chips, therefore, capable of withstanding a 50 ma drive current. the package of the vlmk33.. is the plcc-2 (equivalent to a size b tantalum capacitor). it consists of a lead frame which is embedded in a white thermoplast. the reflector inside this package is filled up with clear epoxy. product group and package data ? product group: led ? package: smd plcc-2 ? product series: power ? angle of half intensity: 60 features ? available in 8 mm tape ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? compatible with ir reflow , vapor phase and wave solder processes according to cecc 00802 and j-std-020 ? preconditioning according to jedec ? level 2a ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? interior and exterior lighting ? indicator and backlighting purposes for audio, video, lcds, switches, symbols, illuminated advertising etc. ? illumination purpose, altern ative to incandescent lamps ? general use note (1) driving led in reverse direction is suitable for a short term application 19225 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. vlmk33q2t1-gs08 amber 90 275 355 20 611 617 622 20 - 1.9 2.5 20 alingap on gaas vlmk33q2t1-gs18 amber 90 275 355 20 611 617 622 20 - 1.9 2.5 20 alingap on gaas vlmk33r1s2-gs08 amber 112 250 280 20 611 617 622 20 - 1.9 2.5 20 alingap on gaas vlmk33r1s2-gs18 amber 112 250 280 20 611 617 622 20 - 1.9 2.5 20 alingap on gaas vlmk33r2t2-2-gs08 amber 140 275 450 20 614 617 622 20 - 1.9 2.5 20 alingap on gaas VLMK33S1T1-GS08 amber 180 275 355 20 611 617 622 20 - 1.9 2.5 20 alingap on gaas vlmk33s1t1-gs18 amber 180 275 355 20 611 617 622 20 - 1.9 2.5 20 alingap on gaas absolute maximum ratings (t amb = 25 c unless otherwise specified) vlmk33.. parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current i f 50 ma power di ssipation p v 130 mw junction temperature t j 125 c operating temperature range t amb -40 to +100 c storage temperature range t stg -40 to +100 c soldering temperature t 5 s t sd 260 c thermal resistance junction / ambient mounted on pc board (pad size > 16 mm 2 )r thja 400 k/w
vlmk33.. www.vishay.com vishay semiconductors rev. 1.9, 03-aug-15 2 document number: 81350 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). in order to ensure availability, single brightness groups will be not orderable. in a similar manner for colors where wavelength groups are measured and binned, single wave length groups wi ll be shipped on any one reel. in order to ensure availability, single wavelength groups will be not orderable. note ? wavelength are tested at a current pulse duration of 25 ms. optical and electrical characteristics (t amb = 25 c unless otherwise specified) vlmk33.., amber parameter test condition p art symbol min. typ. max. unit luminous intensity i f = 20 ma vlmk33q2t1 i v 90 275 355 mcd vlmk33r1s2 i v 112 250 280 mcd vlmk33r2t2-2 i v 140 275 450 mcd vlmk33s1t1 i v 180 275 355 mcd luminous flux/luminous intensity v /i v - 3.14 - mlm/mcd dominant wavelength i f = 20 ma vlmk33q2t1 d 611 617 622 nm vlmk33r1s2 d 611 617 622 nm vlmk33s1t1 d 611 617 622 nm vlmk33r2t2-2 d 614 617 622 nm peak wavelength i f = 20 ma p - 624 - nm spectral bandwidth at 50 % i rel max. i f = 20 ma ? -18- nm angle of half intensity i f = 20 ma ? - 60 deg forward voltage i f = 20 ma v f -1.92.5 v reverse current v r = 5 v v r -0.0110 a luminous intensity classification group luminous intensity (mcd) min. max. q1 71 90 q2 90 112 r1 112 140 r2 140 180 s1 180 224 s2 224 280 t1 280 355 t2 355 450 color classification group dominant wavelength (nm) amber min. max. 1 611 618 2 614 622 crossing table vishay osram vlmk33q2t1 lat676-q2t1 vlmk33r1s2 lat676-r1s2 vlmk33s1t1 lat676-s1t1
vlmk33.. www.vishay.com vishay semiconductors rev. 1.9, 03-aug-15 3 document number: 81350 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - forward current vs. pulse length fig. 3 - relative luminous in tensity vs. angular displacement fig. 4 - relative luminous in tensity vs. angular displacement fig. 5 - forward current vs. forward voltage fig. 6 - change of dominant wavelength vs. forward current 0 10 20 30 40 50 60 70 80 90 100 0 25 50 75 100 125 16784 r thja = 400 k/w i f - max. permissible forward current (ma) t amb - ambient temperature (c) 0.00 0.02 0.04 0.06 0.08 0.10 0.12 t p - pulse length (s) i f - forward current (a) 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 t p /t = 0.005 0.05 0.5 17044 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement 0.0 0.2 0.4 0.6 0.8 1.0 1.2 570 590 610 630 650 670 - wavelength (nm) i rel. - relative luminous intensity amber v f - forward voltage (v) i f - forward current (ma) 1 10 100 1.0 1.5 2.0 2.5 3.0 3.5 amber 0.01 0.1 1 10 1 10 100 i f - forward current (ma) i v rel - relative luminous intensity amber
vlmk33.. www.vishay.com vishay semiconductors rev. 1.9, 03-aug-15 4 document number: 81350 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative luminous inte nsity vs. ambient temperature fig. 8 - change of dominant wavelength vs. ambient temperature fig. 9 - change of forward voltage vs. ambient temperature 0.0 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) i v rel - relative luminous intensity amber - 6 - 4 - 2 0 2 4 6 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) ? d - change of dom. wavelength (nm) amber - 200 - 150 - 100 - 50 0 50 100 150 200 250 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) v f - change of forward voltage (mv) 10 ma 30 ma 50 ma amber
vlmk33.. www.vishay.com vishay semiconductors rev. 1.9, 03-aug-15 5 document number: 81350 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters drawing-no.: 6.541-5067.01-4 s pecification s according to din technical drawing s i ss ue: 6; 23.09.13 dimen s ion s in mm c a ?2.4 pin identification 3.5 0.2 1.75 0.1 0.9 2.8 0.15 2.2 3 +0.15 0 . 8 mounting pad layout 4 4 1.2 2.6 (2.8) 1.6 (1.9) dimen s ion s : reflow and vapor pha s e (wave s oldering) area covered with s olderre s i s t
vlmk33.. www.vishay.com vishay semiconductors rev. 1.9, 03-aug-15 6 document number: 81350 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 method of taping / polarity and tape and reel smd led (vlm3-series) vishays leds in smd packages are available in an antistatic 8 mm blister tape (i n accordance with din iec 40 (co) 564) for automatic compo nent insertion. the blister tape is a plastic strip with impressed component cavities, covered by a top tape. taping of vlm.3.. fig. 10 - tape dimens ions in mm for plcc-2 reel package dimension in millimeters for smd leds, tape option gs08 (= 1500 pcs) fig. 11 - reel dimensions - gs08 reel package dimens ion in millimeters for smd leds, tape option gs18 (= 8000 pcs) preffered fig. 12 - reel dimensions - gs18 soldering profile fig. 13 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020) fig. 14 - double wave soldering of opto devices (all packages) adhesive tape component cavity blister tape 94 8670 1.85 1.65 4.0 3.6 3.6 3.4 2.05 1.95 1.6 1.4 4.1 3.9 4.1 3.9 5.75 5.25 8.3 7.7 3.5 3.1 2.2 2.0 0.25 94 8668 180 178 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 14.4 max. 10.0 9.0 120 94 8665 identification label: vishay type group tape code production code quantity 321 329 identification 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 14.4 max. 10.4 8.4 120 18857 label: vishay type group tape code production code quantity 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19885 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2a max. 2 cycles allowed 255 c 235 c to 260 c 2 k/s ca. 200 k/s second wave first wave 5 s full line: typical dotted line: process limits time (s) temperature (c) lead temperature 300 250 200 150 100 50 0 0 50 100 150 200 250 948626-1 ttw soldering (acc. to cecc00802) 100 c to 130 c forced cooling ca. 2 k/s ca. 5 k/s
vlmk33.. www.vishay.com vishay semiconductors rev. 1.9, 03-aug-15 7 document number: 81350 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label (example) a) type of component b) manufacturing plant c) sel - selection code (bin): e.g.: s1 = code for luminous intensity group 3 = code for color group d) total quantity e) batch = date code: year / week / manufacturing plant f) region code 22126 106 37 a bcd f e
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
